 |
|||
|
|
|||
|
Page Title:
TURRET RACE DRAIN HOSE REPLACEMENT (Sheet 1 of 1) |
|
||
| ||||||||||
|
|
  TM 9-2350-222-20-1-5
TURRET RACE DRAIN HOSE REPLACEMENT (Sheet 1 of 1)
TOOLS:
Flat-tip screwdriver
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
REMOVAL:
1.
Using socket, remove two screws and washers (A) securing hose clamps (B).
2.
Using screwdriver, loosen clamp (C) securing hose (D) to turret race drain tube and remove hose
(D).
3.
Remove clamps (B) and (C) from hose (D). Throw hose (D) away.
INSTALLATION:
1.
Install clamp (C) onto hose (D).
2.
Install hose (D) onto turret race drain tube.
3.
Slide clamp (C) up over hose (D) and drain tube and, using screwdriver, tighten clamp (C).
4.
Install two clamps (B) onto hose (D).
5.
Using socket, install and tighten two screws and washers (A) to secure clamps (B).
End of Task
TA140667
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals