INSTALLATION-continued

TM 9-2350-222-20-1-5

TURRET INFLATABLE SEAL MANIFOLD, GAGE, AND RELATED PARTS REPLACEMENT (Sheet

7 of 10)

10.

Remove assembled gage (J), manifold (A), check

valve (D), and attached components from vise.

Position assembled gage (J), manifold (A), check

11.

valve (D), and attached components as a unit to

bracket (K).

12.

Using 7/16 inch wrench, install two screws and

lockwashers (L) to secure manifold (A) to

bracket (K).

13. Install clamp (M) onto hose (N).

14. Install hose (N) onto connector (F) and slide

clamp (M) over hose and connector.

15. Using screwdriver, tighten clamp (M).

Go on to Sheet 8

TA140663

16-51