REMOVAL-continued

TM 9-2350-222-20-1-5

TURRET INFLATABLE SEAL MANIFOLD, GAGE, AND RELATED PARTS REPLACEMENT (Sheet

5 of 10)

NOTE

Perform the following steps

with unit in vise.

17. Using 9/16 inch wrench, remove gage (T).

18. Using 7/16 inch wrench, remove drain cock

(V).

19. Using 7/16 inch wrench, remove elbow (G).

20.

Using 1-1/16 inch wrench to hold bottom of

check valve (U), use 9/16 inch wrench and

remove connector (W) and preformed packing

(X). Throw preformed packing (X) away.

21.

Using 9/16 inch wrench to hold adapter (Y), use 1-1/16 inch wrench on top of check valve (T) and

remove check valve and preformed packing (Z). Throw preformed packing (Z) away.

22.

Using 9/16 inch wrench, remove adapter (Y) from manifold (R).

23.

Remove manifold (R) from vise.

Go on to Sheet 6

TA140661

16-49