 |
|||
|
|
|||
|
Page Title:
BULKHEAD ACCESS COVER REPLACEMENT (Sheet 1 of 2) |
|
||
| ||||||||||
|
|
  TM 9-2350-222-20-1-5
BULKHEAD ACCESS COVER REPLACEMENT (Sheet 1 of 2)
Flat-tip screwdriver
TOOLS:
5 in. extension with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Putty knife
Dry cleaning solvent (Item 54, Appendix D)
SUPPLIES:
Gasket (8762244)
Lockwashers (MS35338-65) (12 required)
Rags (Item 65, Appendix D)
Adhesive (Item 4, Appendix D)
REFERENCE: TM 9-2350-222-10
REMOVAL:
NOTE
T h e r e are two bulkhead
access covers directly oppo-
site each other.
1.
Traverse turret to gain access to access
cover (A) (TM 9-2350-222-10).
2.
Using socket, remove 12 screws (B) and
lockwashers (C) securing cover (A) and
gasket (D). Throw lockwashers (C) away.
3.
Using falt-tip screwdriver, remove cover
(A) and gasket (D). Throw gasket away.
4.
Using putty knife, rags, and dry cleaning solvent (Item 54, Appendix D) remove any old gasket
material from cover and mating surface on hull.
Go on to Sheet 2
TA253556
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals