TM 9-2350-222-20-1-4
STEERING CONTROL LINK ASSEMBLY REPLACEMENT (Sheet 2 of 3)
NOTE
Support link (F) with free hand to prevent link from falling
under transmission. If necessary, use pin punch and hammer
on this side as indicated in step 4 to loosen shaft (E).
4.
Remove shaft (E) from connecting link (C) and link (F).
5.
Remove link (F) and washers (G) from link (C).
6.
Using 5/16 inch wrench, remove grease fitting (H) from link (F).
Go on to Sheet 3
TA140529
15-39