TM 9-2350-222-20-1-4
STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 2 of 13)
ADJUSTMENT:
NOTE
When engine, transmission, or entire powerplant is exchanged
in a vehicle, driver's steering control must be checked for
centering and adjustment. Go to steps 1 and 2.
NOTE
Check to make sure rod end bearings are service before
proceeding with any linkage adjustments.
1.
While seated in driver's station, ove steering
control (A), then release and check that it
centers.
DRIVER'S STATION
2.
If driver's, steering control does not center,
insert locating pin (B). If it does, go to step
20.
Go on to Sheet 3
TA140518
15-3