TM 9-2350-222-20-1-4
COMPENSATING IDLER HUB AND ARM REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
Grease (Item 36, Appendix D) new packing (A).
1.
Install it to groove in idler arm mount.
Using three persons, lift hub and arm
2.
assembly (B) to mounting position.
Push arm of assembly (B) into mount
3.
opening.
4.
Aline holes in grease seal retainer (C) with
mounting holes on hub (D).
5.
Using socket with torque wrench, tighten
6.
screws (E) to 140-165 lb-ft (190-224 N m).
Using grease gun to fitting, shoot grease (Item
7.
36, Appendix D) into idler arm mount housing
(LO 9-2350-222-12).
8.
Test drive tank a short way (TM 9-2350-222-10).
9.
TA253485
End of Task
14-66 Change 1