TM 9-2350-222-20-1-4
TORSION BAR ANCHOR REPLACEMENT (Sheet 1 of 3)
TOOLS: 3/4 in. socket with 1/2 in. drive
Putty knife
Extractor too] set
Portable drill and drill set
Crowbar
Pry bar
SUPPLIES: Gasket
Corrosion preventive (Item 80, Appendix D)
Pins (2 required)
Solid film lubricant (Item 81, Appendix D)
Lockwashers (4 required )
PRELIMINARY PROCEDURE:
remove torsion bar from exact opposite side of tank
REMOVAL:
1.
Using socket, remove four screws (A) and
2.
Using pry bar, pry cover (C) free from
housing (D).
3.
Remove cover (C), gasket (E), and anchor (F)
as assembly from housing (D). Throw gasket
(E) away.
Go on to Sheet 2
Change 5
14-31