TM 9-2350-222-20-1-4
BRAKE QUICK-DISCONNECT AND HOSE ASSEMBLY REPLACEMENT (Sheet 4 of 7)
CLEANING AND INSPECTION:
1.
Clean all metallic parts in dry cleaning solvent (Item 54, Appendix D).
Inspect all parts for damage or wear. Replace all unserviceable parts.
2.
3.
Inspect tube and hose assembly nuts for cracks. Replace tube or hose assembly if cracks are
found.
INSTALLATION:
1.
Insert coupling half (A) through hole in bracket
(B).
Thread nut (C) onto coupling half (A) finger
2.
tight.
3.
Using adjustable wrench to hold coupling (A)
and 7/8 inch wrench on nut (C), tighten nut.
NOTE
Do not tighten nut of tee (D) at
this time. It will have to be alined
later.
Thread nut of tee (D) on coupling half (A) finger
4.
tight.
Go on to Sheet 5
TA140358
13-50