TM 9-2360-222-20-1-4
FINAL DRIVE (LEFT AND RIGHT) REPLACEMENT (Sheet 6 of 6)
16. Using 3/16 inch allen wrench, remove plug
(K) from left final drive.
17. Using adjustable wrench, install tee (L) into
left final drive where plug (K) was.
Left Side
18. Using fingers connect tube assembly (M) and tubing (J) to tee (L).
19. Using torque wrench and 9/16 inch crowfoot (Item 37, Chapter 3, Section 1), tighten tubing(J) 75-85
lb-in (8.4-9.5 N m).
20. Using torque wrench and 9/16 inch crowfoot, tighten tube assembly (M) 75-85 lb-in (8.4-9.5 N m).
25. Fill final drive with oil (LO 9-2350-222-12).
26. Drive vehicle to perform operational check (TM 9-2350-22210).
End of Task
TA253398
Change 1 12-5