TM 9-2350-222-20-1-4
SHIFT LINKAGE ADJUSTMENT (Sheet 2 of 20)
ADJUSTMENT:
1.
Try to move transmission shift lever (A) to P
position (B). If transmission shift lever cannot
be moved to P position, go to step 4. If
transmission shift lever can be moved to P
position, go on to step 2.
2.
Go to right rear of vehicle and try to insert
locating pin into alinement hole (C). If
locating pin cannot be inserted, go to step 7.
If locating pin can be inserted, remove
locating pin and go on to step 3.
3.
At top of transmission, check position of
shifting position indicator (D). If shifting
position indicator (D) is pointing to most
forward dot (E), notify support maintenance. If
shifting position indicator (D) is not pointing to
most forward dot, go to step 130.
4.
At top of transmission, using 9/16 inch wrench,
remove screw (F) and remove shifting rod
bearing end (G) from clevis (H).
5.
At driver's station, move transmission shift
lever (A) to P position.
GO on to Sheet 3
11-3