TM 9-2350-222-20-1-4
CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT, LEFT FUEL TANK
(Sheet 2 of 6)
2.
Using diagonal cutting pliers, remove lockwire
(B) securing four screws (C) on capacitor and
housing (D).
3,
Using screwdriver, remove four screws,
Iockwashers, and flat washers (C) securing
capacitor and housing (D). Slowly separate
capacitor and housing (D) from cover (E).
Capacitor and housing (D) is connected to
cover (E) with an electrical lead. Throw
4.
Using screwdriver, remove screw (F) and lockwasher (G) that secure electrical lead (H) to adapter
(J). Remove capacitor and housing (D) from cover (E). Throw lockwasher (G) away.
5.
Using diagonal cutting pliers, remove lockwire
(K) securing 12 screws (L) on access cover (E).
6.
Using 1/2 inch socket, remove 12 screws (L) and
washers (M).
GO on to Sheet 3
Change 1 10-397