TM 9-2350-222-20-1-4
TRANSMISSION WIRING HARNESS REPLACEMENT (Sheet 2 of 7)
4.
Using 3/4 inch wrench, remove six nuts (G) an
clamps (H) securing wiring harness to
transmission.
5.
Using socket, remove nut (J) and clamp (K).
6.
Using two 7/16 inch wrenches, remove screw
(L), lockwasher (M), nut (N), and clamp (P).
7.
Using spanner wrench, disconnect wiring
harness connector (Q).
8.
Using screwdriver, remove grommet (R) from
rear engine shroud (S). Throw grommet away.
9.
Pull wiring harness connector (Q) through
shroud (S) and remove wiring harness from
transmission.
Go on to Sheet 3
10-379