TM 9-2350-222-20-1-4
DUST DETECTOR WARNING LIGHT BOX ASSEMBLY AND BRACKET REPLACEMENT (Sheet 3 of 3)
3.
Put dust detector warning light box (K) in
position on bracket (A or E) and secure with
two screws (L), new internal tooth Llock-
washers (M), and nuts (N), using one 7/16 inch
wrench to tighten screws (L) while holding
nuts (N) with other 7/16 inch wrench.
Connect harness connector (P) to connector
4.
(Q) on dust detector warning light box (K).
TA250693
End of Task
10-350.18
Change 3