TM 9-2350-222-20-1-4
DUST DETECTOR WARNING LIGHT HARNESS ASSEMBLY REPLACEMENT (Sheet 1 of 3)
NOTE
. Replacement of the dust detector warning light harness assembly is
the same whether the dust detector warning light box is mounted with
the NATO slave connector or with conventional slave connectors.
NATO slave connector mounting is shown.
TOOLS:
7/16 in. socket with 1/2 in. drive
6 in. extension with 1/2 in. drive
Pliers, slip joint, plastic jaw insert
SUPPLIES: Lockwasher (M S35333-40) (4 required)
PRELIMINARY PROCEDURE: Disconnect three battery ground straps (page 10-283)
REMOVAL:
1.
Disconnect four lead
connectors (A) connecting
dust detector warning
light wiring harness (B) to
front master harness
warning light harness
(D).
2. Using socket, extension, and ratchet, remove two
securing three clamps (J, K, and L) to domelight
detector warning light harness (B) out of clamps (J
and K).
TA250688
10-350.13
Change 3