TM 9-2350-222-20-1-4
ENGINE WIRING HARNESS REPLACEMENT (2D ENGINE) Sheet 10 of 12)
Place wiring harness (A) in position along
24.
bottom of engine.
place three clamps (AD) in position around
25.
wiring harness (A).
Using 7/16 inch socket and wrench, install
26.
securing three clamps (AD) and wiring harness
to engine.
27. Using slip joint pliers, install connector (AF)
t o hour meter (AG)
Connect electrical lead (AH) (CKT 33) to
28.
29.
Connect electrical lead (AK) (CKT 509L) to
engine oil temperature thermostatic switch
(AL).
30.
Connect electrical lead (AM) (CKT 36) to
Connect electrical lead (AP) (CKT 509L) to
31.
engine oil pressure transmitter (AQ).
Place clamp (AR) (hidden) in position on
32.
wiring harness (A).
Using 1/2 inch socket with extension, install
33.
nut securing wiring harness (A) and clamp
(AR).
Place two clamps (AS) in position on wiring
34.
harness (A).
Using 1/2 inch socket, install two screws and
35.
A139899
Go on to Sheet 11
10-348