TM 9-2350-222-20-1-4
ENGINE WIRING HARNESS REPLACEMENT (2D ENGINE) (Sheet 5 of 12)
30. Using pliers, loosen, and using hands,
disconnect connector (AM) from hour meter
31. Using 1/2 inch socket with extension, remove
Iockwashers away.
32.
Remove two clamps (AQ).
33.
Using slip joint pliers, loosen, and using
hands, disconnect connector (AR) from
fuel-water separator control (AS).
34.
Using 1/2 inch socket with extension, remove
screw and lockwasher (AT) securing clamp
(AU). Throw lockwasher away.
35.
Remove clamp (AU).
36. Using 7/8 inch wrench, disconnect electrical
lead (AV) from front of engine.
37. Using slip joint pliers, loosen, and using hands,
disconnect electrical connector (AW) from
38. Using 9/16 inch wrench, remove nut (AY)
securing clamp (hidden).
39. Remove clamp.
GO on to Sheet 6
10-343