TM 9-2350-222-20-1-4
BATTERY TESTING AND REPLACEMENT (Sheet 7 of 13)
7.
Using 9/16 inch wrench, remove four
retainer bolts and washers (k)( holding battery
holddown retainer (L).
8.
Remove holddown retainer (L) from batteries
(M).
9.
Lift up and slide back three protective boots (N) on three positive terminals (P).
10.
Using 1/2 inch wrench on nuts (Q) and 1/2
inch wrench on bolts (R), loosen nuts
(Q) and bolts (R) on three positive terminals (P).
11.
Using battery terminal puller, remove three
positive terminals (P) from battery post (S).
Cover positive terminals with rags and position
away from battery box and batteries.
Go on to Sheet 8
TA139846
10-295