TM 9-2350-222-20-14
TRANSMISSION OIL PRESSURE TRANSMITTER REPLACEMENT (Sheet 3 of 3)
1.
Using 3/4 inch wrench, install bushing (A) to transmission socket.
2.
Using 7/8 inch wrench, install transmitter (B) to bushing (A).
Push socket of rubber insulated connector (C) into transmitter cap (D).
3.
4.
Remove rags from under transmitter.
Start and run engine. Observe oil pressure indicator for normal oil pressure (TM 9-2350- 222-10).
5.
6.
Shut down engine (TM 9-2350-222-10).
7.
Install transmission shroud (page 9-23).
End of Task
TA139828
10-276