TM 9-2350-222-20-14
TRANSMISSION
OIL PRESSURE TRANMITTER REPLACEMENT (Sheet 2 of 3)
REMOVAL:
1.
Place rags under transmitter.
2.
Pull socket of rubber insulated connector (A) from transmitter cap (B).
3.
Using 7/8 inch wrench, remove transmitter (C) from bushing (D).
4.
Using 3/4 inch wrench, remove bushing (D) from transmission socket.
5.
Check bushing (D) for cracks and crossed threads. Replace if necessary.
INSTALLATION:
NOTE
P r i o r to installation, l i g h t l y c o a t m a l e t h r e a d s o f a l l
components with sealing compound (Item 20, Appendix D).
Go on to Sheet 3
TA139827
10-275