TM 9-2350-222-20-1-4
MASTER RELAY REPLACEMENT (Sheet 2 of 3)
REMOVAL:
1.
Using spanner wrench, remove connector (A) from master relay (B).
2.
Using spanner wrench, remove connector (C) from master relay (B).
3.
Using 7/8 inch wrench, remove connector (D),
NOTE
Some vehicles do not have protection device (E). If your
vehicle does not have protection device (E), skip step 4 and go
on to steps 5 and 6. If your vehicle does have protection
device (E), continue with steps 4 through 6.
4.
Using 3/4 inch wrench, remove protection device (E) from master relay (B).
5.
Using socket and 1/2 inch wrench, remove two bolts (F), four lockwashers (G), and two nuts
6.
Remove master relay (B) from plate (J) and from vehicle.
Go on to Sheet 3
TA139723
10-167