TM 9-2350-222-20-1-4
HEADLIGHT STOWAGE LAMPHOLDER REPAIR AND REPLACEMENT (Sheet 2 of 2)
DISASSEMBLY:
Using screwdriver, remove two screws (A) with
1.
Remove defective spring clip (B) from
2.
lampholder (C) and throw it away.
ASSEMBLY:
Place new spring clip (B) in position on
1.
lampholder (C).
Using screwdriver, install two screws (A) with
2.
INSTALLATION:
Place lampholder (C) in position at mounting
1.
location.
Using wrench, install three flat washers (D),
2.
Manually install dust cap (G) by turning
3.
clockwise.
TA139714
End of Task
10-158