TM 9-2350-222-20-1-4
INSTRUMENT PANEL CLUSTER ASSEMBLY REPAIR (Sheet 1 of 22)
Engine Oil Pressure Indicator Replacement (Sheet 1 of 2)
TOOLS: 3/8 in. combination box and open end wrench
SUPPLIES: Silicone compound (Item 32, Appendix D)
Lockwasher (MS35338-43) (2 required)
PRELIMINARY PROCEDURE:
REMOVAL:
1.
Remove two leads (circuits 27 and 36) from rear of indicator (A) by pulling out,
2.
Using wrench, remove two nuts (B) and
mounting bracket (D) to panel. Throw
3.
Remove indicator (A), mounting bracket (D),
and bezel (E).
Go on to Sheet 2
TA139684
10-128