TM 9-2350-222-20-1-4
MASTER CONTROL PANEL REPLACEMENT (Sheet 4 of 4)
5.
Aline control panel (A) between mounting
bracket (F).
NOTE
Support panel in mounting
l o c a t i o n while installing screws
(G).
6.
left side of control panel (A) securing panel to
bracket (F).
on right side of control panel (A) securing
so equipped) to bracket (F).
8. Using combination wrench, tighten two
screws (G) on left side of control panel.
9. Using socket, extension, and ratchet, tighten
two screws (G) on right side of control panel
(A).
10. Using spanner wrench install cable
connector: (J), (K), (L), and (M).
11. Connect three battery ground cables
12. Perform functional test (TM 9-2350-222-10).
End of Task