REMOVAL

TM 9-2350-222-20-1-4

MASTER CONTROL PANEL DISPLACEMENT (Sheet 2 of 3)

REMOVAL:

Set MASTER BATTERY switch to OFF.

NOTE

S u p p o r t master control panel

while performing the following

steps.

NOTE

Only late model tanks will have

the air cleaner blower motor

If switch.

s w i t c h bracket.

bracket is not present, perform

step two to remove screws (A)

only.

Using wrenches, remove two screws and lockwashers (A) securing air cleaner blower switch

bracket (B) on right side of master control panel (C). Throw lockwashers away.

Position air cleaner blower switch bracket (B) aside.

Using wrenches, remove two screws and

lockwashers (D) securing left side of master

control panel (C). Throw lockwashers away.

Lower master control panel (C) to gain access to

rear of panel.

Go on to Sheet 3

TA139602

10-46