TM 9-2350-222-20-1-4
STARTER LOW VOLTAGE RELAY SOLENOID (SIDE MOUNTED) REPLACEMENT
(sheet 1 of 2)
TOOLS:
5 in. extension with 1/2 in, drive
7/16 in. socket with 1/2 in. drive
7/16 in. combination box and open
end wrench
Spanner wrench
SPECIAL TOOLS: Ground hop kit (Item 30,
Chapter 3, Section I)
SUPPLIES: Self-locking nut (MS21045-4) (2 required)
REFERENCE: TM 9-2350-222-10
PRELIMINARY PROCEDURES: Remove powverplant (page 5-25
REMOVAL:
1.
Using spanner wrench, unscrew electrical plug
(A) from front of relay solenoid (B).
2.
Using socket and 7/16 inch wrench, remove two
nuts (E) securing relay solenoid (B) to mounting
bracket (F). Remove relay solenoid. Throw nuts
away.
INSPECTION:
Inspect insulator (D) and wiring harness (G) with
connector plug (A) for cracks or damage. Replace if
damaged.
GO on to Sheet 2
10-33
Change 5