 |
|||
|
|
|||
|
Page Title:
VOLTAGE CONTROL BOX REPLACEMENT (Sheet 1 of 2) |
|
||
| ||||||||||
|
|
  TM 9-2350-222-20-1-4
VOLTAGE CONTROL BOX REPLACEMENT (Sheet 1 of 2)
TOOLS: 7/16 in. combination box and open end wrench
Spanner wrench
REFERENCE: TM 9-2350-222-10
SUPPLIES: Lockwasher (MS35336-44) (2 required)
Open turret platform access door (TM 9-2350-222-10)
PRELIMINARY PROCEDURES:
Traverse turret to gain access to voltage
control box (TM 9-2350-222-10)
REMOVAL:
1.
Using spanner wrench, disconnect electrical connector (A) from voltage control box (B).
NOTE
Screws and lockwashers (C) securing voltage control box (B)
are located under the voltage control box.
2.
Using 7/16 inch wrench, remove two screws and lockwashers (C) securing voltage control box (B)
to bracket. Throw lockwashers away.
3.
Remove voltage control box (B) from mounting bracket and vehicle.
Go on to Sheet 2
TA139579
10-24
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals