REMOVAL-continued

TM 9-2350-222-20-1-4

VOLTAGE REGULATOR ASSEMBLY REPLACEMENT (Sheet 2 of 3)

Using spanner wrench, remove connectors (C)

and (D) from voltage regulator (B).

Using 5/16 inch wrench, remove screw (E), star

washer (F), ground lead (G), and star washer (H)

from voltage regulator (B).

NOTE

S c r e w s (J) and (K) are part of

voltage regulator (B) and cannot

Completely loosen

be removed.

s c r e w s (J) and (K) when doing

steps 5 and 6.

Using 3/8 inch socket and extension, completely loosen three screws (J).

(HIDDEN)

Using 3/8 inch wrench, completey loosen screw (K).

Using hands, remove voltage regulator (B) from bracket (L).

Using 7/16 inch wrench, remove four screws

and lockwashers (M) and three clamps (N).

Throw lockwashers away.

Using hands, remove bracket (L).

Using 7/16 inch wrench, remove screw (P),

lockwasher (Q), and ground lead (G) from

terminal (R) on hull. Throw lockwasher

away.

Go on to Sheet 3

TA253217

10-20 Change 1