REMOVAL-continued

TM 9-2350-222-20-1-4

GENERATOR REPLACEMENT (Sheet 7 of 15)

WARNING

Generator weighs approximately 100 pounds; therefore, two

personnel are required to handle generator during removal.

Care must be used to prevent damage to splined shaft and

housing when removing generator.

Using hydraulic jack, support generator (F).

28.

Rotate generator (F) counter clockwise (in direction of arrow) until self-locking nuts (AG) aline

29.

with elongated holes in mounting flange (AH).

Slide generator (F) away from drive adapter (AJ) until drive shaft is disengaged.

30.

Remove generator (F) and flexible boot (J) and place on work bench.

31.

Go on to Sheet 8

TA139565

10-10