REMOVAL-continued

TM 9-2350-222-20-1-4

GENERATOR REPLACEMENT (Sheet 3 of 15)

NOTE

During the remainder of the removal procedure, the screws

and clamps are all one piece. The screws are turned until the

clamp comes apart.

Using screwdriver, turn two screws (G) removing clamps (H) securing flexible boot (J) to generator

(F).

Using screwdriver, turn screw (K) removing clamp (L) from flexible boot (J)

Disconnect flexible boot (J) from exhaust tube (M).

Using 1-1/8 inch wrench, remove electrical connector (N) from generator connector (P).

10.

Go on to Sheet 4

TA139561

10-6