REMOVAL

TM 9-2350-222-20-1-3

TRANSMISSION MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)

REMOVAL:

Using diagonal cutting pliers, cut safety wire

(A) and remove it from bushing (B) and bracket

(C).

Using remover tool, remove two mounts (D)

from bracket (C).

Using bit screwdriver to hold screw (E), use

1-5/ 16 inch wrench to remove self-locking

nut (F) from screw (E). Throw self-locking

nut away.

Remove screw (E) and roller (G) from bracket

(C).

With second person using 1-1 /2 inch wrench

to hold bolt (H), use 1-1/2 inch socket and

extension to remove nut (J) from bolt (H),

Remove lockwasher (K) and bolt (H) from

bracket (C). Throw lockwasher away.

Go on to Sheet 3

6-10

Change 4