 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TM 9-2350-222-20-1-3
ENGINE MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 3)
2.
Using 1-1/8 inch wrench to hold nut (D) and
1-1 /8 inch socket on bolt (E), remove nut (D)
and bolt (E) from bracket (F).
3.
Using 1-1/8 inch socket, remove bolt (G) and
lockwasher (H) from bracket (F) while holding
bushing (J) with 3/4 inch drive T-slide and 36
inch extension bar. Throw Iockwasher away.
4.
Remove bushing (J), mount (K), mounting (L),
and mount (M) from engine assembly.
CLEANING AND INSPECTION:
1.
Clean all parts with dry cleaning solvent (Item
54, Appendix D) and wipe dry with clean rag
(Item 65, Appendix D),
2.
Inspect bushing, mounts, and mountings for
nicks and burrs. Replace damaged parts.
Go on to Sheet 3
TA139374
6-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals