GOVERNED NO-LOAD TEST

TM 9-2350-222-20-1-3

2A ENGINE AND 2D ENGINE POWER PLANT TESTS (GROUND HOP) (Sheet 6 of 15)

GOVERNED NO-LOAD TEST:

Start and operate engine until normal operating temperatures are reached (TM 9-2350-222-10).

WARNING

Take all necessary safety precautions to eliminate possible

injury to personnel or damage to equipment. Stand clear of

transmission output flanges whenever engine is running.

CAUTION

The engine speed must not be

permitted to exceed 2640 rpm for

more than 2 or 3 seconds in the

event of governor malfunction.

NOTE

An indicator on the linkage shaft and four dots on the body

transmission valve casting indicate shift position.

2. Be sure transmission is in neutral position by checking shifting position indicator. If not in

neutral position, grasp shift lever and pull or push lever to set indicator to desired position.

Go on to Sheet 7

TA130283

5-53