INSTALLATION-continued

TM 9-2350-222-20-1-3

POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 19 of 23)

37.

Alining steering rod linkage flats, install

capscrew (X).

38.

Using 7/16 inch wrench, tighten capscrew

(X).

39.

Remove protective coverings from air cleaner

outlet elbow (Y) and turbosupercharger elbow

(Y.1) on each side of powerplant.

40.

Manually install two air cleaner outlet hoses

(Z) on each side of powerplant.

41.

Using socket, tighten adjusting nut (AA)

o n clamp (AA.1) to eliminate clearance

between hasp and "T" bolt. Turn nut one

a d d i t i o n a l turn.

41.1

Using socket and torque wrench, tighten

nut of clamp (AA.2) to 25 to 35 lb. in. (3

to 4 N°m).

Go on to Sheet 19.1

TA249054

Change 2

5-43