INSTALLATION-continued

TM 9-2350-222-20-1-3

POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 15.1 of 23)

NOTE

When powerplant is in place, the

universal joint a n d final drive

adapter will be axially alined.

12.1. While slowly lowering powerplant, aline

universal joint so lip enters tool guides.

WARNING

Do not place your hands inside the

engine compartment. Serious injury

m a y result if power-plant shifts

unexpectedly.

12.2. Using pry bar or rope, rotate universal joint to

aline splines with final drive adapter splines.

13. When powerplant is seated, remove final drive

guide shields, and retrieve final drive adapter

hook-up tool.

Check that powerplant is correctly seated.

14.

Check all clearances around powerplant.

15.

Remove four engine and transmis-

sion sling hooks from four power-

plant lifting eyes.

Go on to Sheet 16

Change 4

5-38.2