INSTALLATION-continued

TM 9-2350-222-20-1-3

POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 15 of 23)

Install six spring washers (A) (three on each

side) to top of transmission mounts.

Install final drive adapter hook-up tool in final

9.1.

drive adapter splines with opening pointed up

and slightly back (1 or 2 teeth from level

position).

Using hoist with engine and trans-

10.

mission sling, lift powerplant into

position over engine compartment.

Use personnel to guide powerplant into hull.

11.

CAUTION

When installing powerplant, turret may have to be traversed

so powerplant will clear outer turret components.

12. Make sure transmission rollers (B) fit into both

powerplant guides (C).

Go on to Sheet 15.1

Change 4

5-38.1