INSTALLATION-continued

TM 9-2350-222-20-1-3

POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 14 of 23)

NOTE

Working area where powerplant mounts is tight and limited.

Make sure all connections are ready. Remove tools, rags, or

other materials not required from engine compartment

before installing powerplant.

Position turret as necessary to accomplish

installation of powerplant.

Using hoist, pick up engine and

transmission sling and install four

sling hooks through four lifting eyes

on powerplant.

Ends of engine and transmission

sling hooks should point toward

outer side of powerplant.

WARNING

Be careful when lifting powerplant.

Serious injury to

personnel can result from careless handling.

CAUTION

Powerplant can be damaged if bumped aaainst hull.

Go on to Sheet 15

Change 4

5-38