INSTALLATION

TM 9-2350-222-20- 1-3

POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 13 of 23)

INSTALLATION:

WARNING

Fuel is very flammable and can explode

easily. To avoid serious injury or death,

keep fuel away from open fire and keep

fire extinguisher within easy reach when

working with fuel. Do not work on fuel

system when engine is hot. Fuel can be

i g n i t e d by hot engine.

W h e n working

with fuel, post signs that read `NO

S M O K I N G WITHIN 50 FEET OF VEHI-

CLE."

Remove final drive guide shields covering two final drive adapter assemblies.

Remove (page 12-9, step 1), clean, lubricate, and

install two final dri ve adapter assemblies (page

12-10, steps 4-7).

FINAL DRIVE

Install final drive guide shield over two

final drive adapter assemblies.

ADAPTER ASSEMBLY

Apply a light coat of grease to powerplant mounting surfaces.

Make sure hoist hook is in powerplant

hole of engine and transmission sling.

NOTE

T-end of engine and transmission

sling should be toward front

(engine end of powerplant).

Go on to Sheet 14

Change 4

5-37