REMOVAL-continued

TM 9-2350-222-20-1-3

POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 8.1 of 23)

WARNING

Dry cleaning solvent P-D-680 is toxic and flammable. To avoid injury, wear

protective goggles and gloves and use in a well-ventilated area. Avoid

contact with skin, eyes, and clothes, and do not breathe vapors. Do not use

near open fire or excessive heat. The flash point for Type i dry cleaning

solvent is 100°F (38°C), and for Type II is 140°F (60°C). If you become dizzy

while using dry cleaning solvent, get fresh air immediately and get medical

aid. if contact with eyes is made, wash your eyes with water and get medical

aid immediately.

28.1. Before disengaging quick-disconnect

coupling (AJ.1), place rags under coupling

and clean with dry cleaning solvent.

28.2. Disengage quick-disconnect coupling (AJ.1)

by pulling up and twisting collar of female

half until it snaps off locking nut of male

half.

28.3.

Using plastic caps, cover quick-disconnect

coupling halves.

Go on to Sheet 9

Change 4

5-32.1/(5-32.2 blank)