REMOVAL-continued

TM 9-2350-222-20-1-3

POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 6.1 of 23)

NOTE

Perform steps 16.1 through 16.7 on late model vehicles only.

16.1. Using pliers, remove cotter pin (Y) from

pin (Z) and remove pin (Z) that secures

clevis (AA) to generator exhaust valve

(AB). Throw cotter pin away.

16.2 Using 9/16 inch wrench, remove two

screws and lockwashers (AC) securing

support (AD). Throw lockwashers away.

16.3. Using light rope or heavy masking tape,

tie control cable (AD.1) out of way of

powerplant.

Go on to Sheet 6.2

TA253170

Change 1 5-30.1