POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 1 of 23)

TM 9-2350-222-20-1-3

POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 1 of 23)

PROCEDURE INDEX

PAGE

PROCEDURE

5-26

Removal

5-37

Installation

TOOLS:

5 ton hoist or comparable lifting device capable of lifting powerplant 12 ft. high

Ratchet with 1/2 in. drive

2 in. extension with 1/2 in. drive

9/16 in. socket with 1/2 in. drive

Ratchet with 3/4 in. drive

1-1/2 in. socket with 3/4in. drive

Torque wrench with 3/4 in. drive (0-600 lb-ft) (0-813 N.m)

7/16 in. combination box and open end wrench

11/16 in. combination box and open end wrench

5/16 in. combination box and open end wrench

Adjustable wrench

Spanner wrench

Long round nose pliers

Flat-tip screwdriver

9/16 in. combination box and open end wrench

3/8 in. combination box and open end wrench

SPECIAL TOOLS: Engine and transmission sling (Item 31, Chapter 3, Section I)

Final drive guide shield (Fig F-1, Appendix F) (2 required)

FABRICATED TOOLS:

Final drive adapter hook-up tool (Fig F-4, Appendix F)

SUPPLIES:

Covers for fire extinguisher tubing fittings

Rubber gloves (Item 73, Appendix D)

Covers for primary fuel line fittings

Plastic caps

Goggles (Item 74, Appendix D)

Covers for hydraulic brake line fittings

Covers for fuel return line fittings

Rags (Item 65, Appendix D)

Dry cleaning solvent (Item 54,

Covers for air cleaner outlet hose connect points

Appendix D)

Covers for fire extinguisher elbows (3 required)

Grease (Item 36, Appendix D)

Small rope

Wooden blocks, 12 in. x 12 in. x 14 in. (3 required)

Masking tape (Item 57, Appendix D)

Lockwasher (10 required

Lockwasher (2 required)

Cotter pin

PERSONNEL: Three

REFERENCE:

TM 9-2350-222-10

Go on to Sheet 2

Change 4

5-25