WARNING-continued

TM 9-2350-222-20-1-3

WARNING

Dry cleaning solvent P-D-680 is toxic and flammable. To avoid injury, wear protective goggles and gloves and

use in a well-ventilated area. Avoid contact with skin, eyes, and clothes, and do not breathe vapors. Do not

use near open fire or excessive heat. The flash point for Type I dry cleaning solvent is 100°F (38°C), and for

Type II is 140°F (60°C). If you become dizzy while using dry cleaning solvent, get fresh air immediately and

get medical aid. If contact with eyes is made, wash your eyes with water and get medical aid immediately.

To prevent screws from pulling out of box and injuring personnel, a minimum of 200 pounds

must be placed atop the door before attempting to remove screws.

Compressed air used for cleaning air filter elements and oil coolers will not exceed 90 psi. Use

o n l y with effective chip guarding and personal protective equipment (goggles, face shield,

gloves, long sleeves, etc.).

Always wear goggles and face shield when using compressed air. If dirt blows in your eyes, you

can be blinded.

Make sure unauthorized personnel are not in the area where this task is being performed.

Failure to do so may result in injury.

Fuel

is very flammable and can explode easily. To avoid serious injury or death, keep fuel away

from

open fire and keep fire extinguisher within easy reach when working with fuel. Do not

work

on fuel system when engine is hot. Fuel can be ignited by hot engine. When working with

fuel,

post signs that read "NO SMOKING WITHIN 50 FEET OF VEHICLE."

Change 4