TM  5-5420-22620-1 SUSPENSION Item Use 7. 8. 9. 10 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 3-2 Axle  Remover  Adapter ( 12304246) Remove track support roller axle. (used  with  slide  hammer  puller  5573615) Roadwheel   Adapter (7080285) Remove  roadwheel  arm  and  track adjusting link (used with slide hammer puller  5573615) Track End Connector Wear Gage (10873933) Check wear of end connectors Track  End  Connector  Puller  and  Pump (11669394-1) Remove  track  end  connectors Bearing Cup Handle (7083883) Remove and install bearing cups (used with inserter set items 16 and 17 and remover replacer 7082863) Remove and install roadwheels Roadwheel  Arm  Lifter (7010355) Track  Torquing  Tool  Kit (12326261) Torque track components Final  Drive  Dowel  Remover (8390335) Replace track drive sprocket tapered dowels Inserter  and  Remover (12290993) Remove and install track adjusting link bearing Remove and install outer bearing cups  from  track  support  roller  wheel and compensating idler wheel hub (used with handle, item 11) Bearing Inserter Set (7082834) Bearing Inserter Set (7082876) Remove and install inner bearing cups on roadwheel hub and com- pensating idler hub (used with handle, item 11) Connect track Track  Connecting  Fixture (12252120) Remove and install track adjusting link pin (used with slide hammer puller  5573615) Removal  and  Replacer (11645917) Install inner bearing oil seal on compensating arm spindle and roadwheel arm spindle (used with remover and replacer handle 70828811 Seal Inserter (7078977) Change 5