Self-Deploy Mode

Self-Deploy Mode Put the machine into SELF-DEPLOY mode to travel at high speeds. When the machine is in SELF-DEPLOY mode: • the suspension is active. • the transmission will automatically shift between six speeds in forward. • the blade can be raised, angled or tilted, but not lowered. The blade can be lowered when the machine is in SELF-DEPLOY mode if the electrical power to the machine is off. Always keep clear of the blade when the blade is off the ground. Personal injury can occur. • the engine operates at the high horsepower setting in transmission speeds three through six. • the SELF-DEPLOY indicator is lit. To Place the Machine in SELF-DEPLOY Mode 1. Stop the machine and place transmission control lever (1) into NEUTRAL. 2. Move blade control lever (2) to LIFT, and raise the blade all the way up. 3. Move self-deploy/earthmoving switch (5) into SELF- DEPLOY position. Self-deploy indicator (4) will turn on. If the self-deploy indicator does not come on, raise the blade further until blade down indicator (3) and blade down alarm (6) turn off. NOTE: Self-deploy indicator (4) will only function if the blackout light switch is in the SERVICE DRIVE or STOP LIGHT position. NOTE: Blade down indicator (3) and blade down alarm (6) will only function if the blackout light switch is in the SERVICE DRIVE or STOP LIGHT position. 3 4 5 6 2 1 WARNING ! 62 Operation Section Machine Operation TM5-2430-200-10