Rear Windshield Guard

Coat Hook Coat hook (1) is located in the right rear corner of the cab. Rear Windshield Guard To raise rear windshield guard (1), pull out sharply on the lower corners to release the guard from the rubber fasteners. Raise the guard and allow it to rest on the top of the cab. To lower rear windshield guard (1), raise the guard off the top of the cab and rotate it down in position over the rear window. Press sharply on the lower corners of the guard to secure it in rubber fasteners (2). NOTE: Rear windshield guard (1) provides protection for the operator when the winch is operated. The rear windshield guard should only be raised to clean or replace the rear windshield. At all other times, the rear windshield guard should be lowered and secured in rubber fasteners (2). Operation of the winch while rear windshield guard (1) is in the raised position could result in injury or death. WARNING ! 1 2 1 1 37 Operation Section Monitoring Systems and Cab Features TM5-2430-200-10