Rifle Bracket

36 TM5-2430-200-10 Operation Section Monitoring Systems and Cab Features SINCGARS Bracket Installation Single Channel Ground and airborne Radio system (SINCGARS) mounting racket installation location (1) is to the left of the operator’s seat, on the cab floor. NOTE: for instructions to install the SINCGARS, unit maintenance should refer to TB11-5820-890-20-113, Installation Instructions for Installation Kit, Electronic Equipment, MK-2901/VRC (NSN 5895-01-458-7547 (EIC: N/A) to Permit Installation of Radio Sets AN/VRC-87/88/90 Series in a DEUCE Vehicle. This Publication should be read and understood before the SINCGARS is installed. PLGR/SINCGARS Power Strip Power strip (1) for the PLGR and SINCGARS is located behind and to the left of the operator’s seat. NOTE: The capacity of the power strip is 10 amps at 24 volts. The power strip is protected by the start circuit breaker. Refer to “Operation Section, Machine Features, Main Circuit Breakers” in this manual for the location of this circuit breaker. Rifle Bracket Rifle bracket (1) is located in front of the right console, On the right side of the cab. Windshield Washer Fluid Bottle Windshield washer fluid bottle (1) is located on the Right side wall of the cab.