Seat Adjustment

Seat Adjustment Raise/Lower (1)—Lift and hold the lever up, raise or lower the seat, and then release the lever to lock the seat at the desired height. Suspension (2)—Turn the knob clockwise to increase the stiffness of the suspension. Turn the knob counterclockwise to decrease the stiffness of the suspension. When the desired stiffness is achieved, a yellow indicator will be flush with the end of a small tube at the lower left front of the seat frame. Fore/Aft (3)—Move and hold the lever out (away from the seat cushion), and slide the seat fore or aft. Release the lever when the seat is in the desired position. Mirrors Move mirror (1) by hand to set the correct angle for maximum visibility. The machine is equipped with a mirror on both sides of the cab. Fold the mirrors against the side of the cab when operating in areas where the mirrors can be damaged by branches or other objects. Rear View Mirror Loosen knob (2) and rotate mirror (1) up or down. Tighten the knob when the mirror is in the desired location. PLGR Bracket Mounting bracket (1) for the Precision Lightweight GPS Receiver (PLGR) is located on the control console to the right of the operator. NOTE: Refer to Appendix F for PLGR installation instructions. 1 1 2 1 1 2 3 35 Operation Section Monitoring Systems and Cab Features TM5-2430-200-10