With the start switch in the ON position and the engine NOT RUNNING, a reading in the first red zone indicates dead batteries. With the start switch in the ON position and the engine NOT RUNNING, a reading in the black-and-white striped zone indicates that the batteries are not fully charged. With the start switch in the ON position and the engine NOT RUNNING, a reading in the first green zone indicates the batteries are fully charged. With the ENGINE RUNNING, a reading anywhere below the second green zone (normal operating range) indicates that the alternator is not producing enough voltage to charge the batteries and supply current to the electrical accessories. With the ENGINE RUNNING, a reading in the second red zone indicates that the alternator is overcharging. With the ENGINE RUNNING, if the pointer registers in the first green band, or either red bands, have the problem corrected. Fuel Level (7)—Indicates the approximate quantity of fuel in the fuel tank. NOTICE To   prevent   the   fuel   from   overheating   when   the machine  is  operated  in  ambient  temperatures  above 38°C  (100°F),  the  fuel  level  should  be  maintained above one-half of a tank. Overheated fuel can cause reduced power and possibly damage the fuel system. NOTE: The fuel tank capacity is 341 L (90 U.S. gal). Indicators The indicators are color coded to indicate the importance. • Green—A green indicator means that the indicated system is in operation. • Orange—An orange indicator means to notice that an automatically controlled system is operating. • Red—A red indicator means to pay immediate attention and correct the indicated problem immediately. Tension Fail (1)—Indicates low oil pressure in the drive belt tension system. Do not operate the machine when the tension fail warning   indicator   is   lit.   Braking   efficiency   is reduced if there is not enough drive belt tension. Personal  injury  or  damage  to  the  machine  can occur  if  there  is  not  enough  braking  capacity  to stop the machine. Low Brake Pressure (2)—Indicates low oil pressure in the brake system. Do  not  operate  the  machine  when  the  low  brake pressure    warning    indicator    is    lit.    Braking efficiency is reduced if there is not enough brake system pressure. Personal injury or damage to the machine can occur if there is not enough braking capacity to stop the machine. WARNING ! WARNING ! 1 2 3 5 6 7 4 25 Operation Section Monitoring Systems and Cab Features TM5-2430-200-10