Product Identification and Serial Number Locations

The Product Identification Number (PIN) is used to identify a powered machine that is designed for an operator to ride. Caterpillar products, such as earthmoving equipment not designed for an operator to ride (engines, transmissions, etc.), are identified by serial numbers. Also, most major Caterpillar attachments are identified by serial numbers. For quick reference, record the identification numbers in the spaces provided below the illustration photographs. Plate (1) is mounted on the left side of the machine, under the walkway, near the suspension cylinder mounting points. Machine PIN __________________________________ Plate (2) is located on the top right corner of the cab, inside the operator’s compartment. Cab Information Plate (Upper) ____________________ Plate (3) is located on the right control console inside the operator’s compartment. Cab Information Plate (Lower) ____________________ Plate (4) is located on the side of the transmission and is visible through a hole in the frame, on the right side of the machine. Transmission Serial Number ______________________ Plate (5) is mounted to the rear of the torque converter. Torque Converter Serial Number __________________ 5 4 3 2 1 Product Identification and Serial Number Locations 15 General Section Product Information and Serial Number Locations TM5-2430-200-10