Table 2-1. Preventive Maintenance Checks and Services for M-9 ACE

TM 5-2350-262-10 2-26 Change 6 Table 2-1. Preventive Maintenance Checks and Services for M-9 ACE - Continued Item No. Interval Location Item to Check/ Service Crewmember Procedure Not Mission Capable if: b. Check roadwheels for loss of rubber, pitting, chunking, weather cracking,and separation of rubber from metal. Reference: TM 9-2530-200-24. 22 After Suspension System Continued NOTE b. Separation of one inch of rubber or polyurethane contact from metal surface around 75% of roadwheel and/or chunking that exposes metal extending 3 x 4 inches on wheel surface exists. Weather cracks that exceed 1/4 inch deep and/or extend completely across treadsurface. c.Any missing dented, warped, or damaged roadwheels or any mounting hole elongated. d. Track retainer missing or bent outward more than 3 inches. c. Check for missing and damaged roadwheels. d. Inspect for missing track retainers. Inspect retainers for rips, cracks, and retainers rhat bend outward more than 3 inches (7.61 cm) at edges. Check for loose, missing, bent, and broken hardware. e. Check inner ware plates and wear bars on hull for rips,cracks and gouges; missing and peeling more than 1/8 inch at edges, and for hull exposure. Check for loose, missing, bent and broken hardware. e. Track wear plate missing or peeling more than 1/8 inch at edges. If plate is worn flush with screw head have unit maintenance replace wear plate.